2,879 research outputs found

    Optimization of fermentation medium for nisin production from Lactococcus lactis subsp. lactis using response surface methodology (RSM) combined with artificial neural network-genetic algorithm (ANN-GA)

    Get PDF
    Nisin is a bacteriocin approved in more than 50 countries as a safe natural food preservative. Response surface methodology (RSM) combined with artificial neural network-genetic algorithm (ANN-GA) was employed to optimize the fermentation medium for nisin production. Plackett-Burman design (PBD) was used for identifying the significant components in the fermentation medium. After that, the path of steepest ascent method (PSA) was employed to approach their optimal concentrations. Sequentially, Box-Behnken design experiments were implemented for further optimization. RSM combined with ANNGA were used for analysis of data. Specially, a RSM model was used for determining the individual effect and mutual interaction effect of tested variables on nisin titer (NT), an ANN model was used for NT prediction, and GA was employed to search for the optimum solutions based on the ANN model. As the optimal medium obtained by ANN-GA was located at the verge of the test region, a further Box- Behnken design based on the RSM statistical analysis results was implemented. ANN-GA was implemented using the further Box-Behnken design data to locate the optimum solution which was as follow (g/l): Glucose (GLU) 15.92, peptone (PEP) 30.57, yeast extraction powder (YEP) 39.07, NaCl 5.25, KH2PO4 10.00, and MgSO4·7H2O 0.20, with expected NT of 22216 IU/ml. The validation experiments with the optimum solution were implemented in triplicate and the average NT was 21423 IU/ml, which was 2.13 times higher than that without ANN-GA methods and 8.34 times higher than that without optimization.Key words: Response surface methodology, artificial neural network, genetic algorithm, nisin titer

    Single channel wireless EEG device for real-time fatigue level detection

    Full text link
    © 2015 IEEE. Driver fatigue problem is one of the important factors of traffic accidents. Recent years, many research had investigated that using EEG signals can effectively detect driver's drowsiness level. However, real-time monitoring system is required to apply these fatigue level detection techniques in the practical application, especially in the real-road driving. Therefore, it required less channels, portable and wireless, real-time monitoring and processing techniques for developing the real-time monitoring system. In this study, we develop a single channel wireless EEG device which can real-time detect driver's fatigue level on the mobile device such as smart phone or tablet. The developed device is investigated to obtain a better and precise understanding of brain activities of mental fatigue under driving, which is of great benefit for devolvement of detection of driving fatigue system. This system consists of a Bluetooth-enabled one channel EEG, a regression model, and smartphone, which was a platform recording and transforming the raw EEG data to useful driving status. In the experiment, this was a sustained-attention driving task to implement in a virtual-reality (VR) driving simulator. To training model and develop the system, we were performed for 15 subjects to study Electroencephalography (EEG) brain dynamics by using a mobile and wireless EEG device. Based on the outstanding training results, the leave-one-subject-out cross validation test obtained 90% fatigue detection accuracy. These results indicate that the combination of a smartphone and wireless EEG device constitutes an effective and easy wearable solution for detecting and preventing driver fatigue in real driving environments

    Determination and Distribution Study of Pogostone in Rat Tissues by Ultra-Fast Liquid Chromatography

    Get PDF
    Purpose: To develop and validate a rapid, sensitive and reliable ultra-fast liquid chromatography (UFLC) method with photodiode array (PDA) detection for the determination of pogostone (PO) in rat tissues using honokiol as internal standard (IS).Methods: Rats were randomly divided into two groups (intravenous administration group and oral administration group) and given of a single dose of 10 mg/kg PO by intravenous administration and oral administration, respectively. After intravenous injection, the rats were sacrificed at 15, 60 and 360 min, while rats, after oral administration, were euthanasized at 30, 90 and 360 min, respectively. For the analysis of the preparation, optimal chromatographic conditions were determined using Acquity UPLC BEH C18 column with acetonitrile-water containing 0.1 % formic acid (55:45, v/v) as the mobile phase, at a flow rate of 400 μL/min. UV detection wavelength was set at 310 nm with temperature maintained at 30 °C.Results: Good linear relationship of calibration curve (r > 0.9984) was achieved over the range of 0.1 - 40 μg/mL for all the tissue samples. The limit of quantification (LOQ) and limit of detection (LOD) were 0.1 and 0.05 μg/mL, respectively. This method proved to have good precision, accuracy, stability, extraction recovery and matrix effect for tissue distribution studies of PO in rats.Conclusion: The developed method is suitable for tissue distribution studies in rats following intravenous and oral administration of PO at a dose of 10 mg/kg.Keywords: Ultra-fast liquid chromatography, Tissue distribution, Pogostone, Honokiol, Rat

    HopScotch - a low-power renewable energy base station network for rural broadband access

    Get PDF
    The provision of adequate broadband access to communities in sparsely populated rural areas has in the past been severely restricted. In this paper, we present a wireless broadband access test bed running in the Scottish Highlands and Islands which is based on a relay network of low-power base stations. Base stations are powered by a combination of renewable sources creating a low cost and scalable solution suitable for community ownership. The use of the 5~GHz bands allows the network to offer large data rates and the testing of ultra high frequency ``white space'' bands allow expansive coverage whilst reducing the number of base stations or required transmission power. We argue that the reliance on renewable power and the intelligent use of frequency bands makes this approach an economic green radio technology which can address the problem of rural broadband access

    Identification of chemokine receptors as potential modulators of endocrine resistance in oestrogen receptor–positive breast cancers

    Get PDF
    Introduction Endocrine therapies target oestrogenic stimulation of breast cancer (BC) growth, but resistance remains problematic. Our aims in this study were (1) to identify genes most strongly associated with resistance to endocrine therapy by intersecting global gene transcription data from patients treated presurgically with the aromatase inhibitor anastrazole with those from MCF7 cells adapted to long-term oestrogen deprivation (LTED) (2) to assess the clinical value of selected genes in public clinical data sets and (3) to determine the impact of targeting these genes with novel agents. Methods Gene expression and Ki67 data were available from 69 postmenopausal women with oestrogen receptor–positive (ER+) early BC, at baseline and 2 weeks after anastrazole treatment, and from cell lines adapted to LTED. The functional consequences of target genes on proliferation, ER-mediated transcription and downstream cell signalling were assessed. Results By intersecting genes predictive of a poor change in Ki67 with those upregulated in LTED cells, we identified 32 genes strongly correlated with poor antiproliferative response that were associated with inflammation and/or immunity. In a panel of LTED cell lines, C-X-C chemokine receptor type 7 (CXCR7) and CXCR4 were upregulated compared to their wild types (wt), and CXCR7, but not CXCR4, was associated with reduced relapse-free survival in patients with ER+ BC. The CXCR4 small interfering RNA variant (siCXCR4) had no specific effect on the proliferation of wt-SUM44, wt-MCF7 and their LTED derivatives. In contrast, siCXCR7, as well as CCX733, a CXCR7 antagonist, specifically suppressed the proliferation of MCF7-LTED cells. siCXCR7 suppressed proteins associated with G1/S transition and inhibited ER transactivation in MCF7-LTED, but not wt-MCF7, by impeding association between ER and proline-, glutamic acid– and leucine-rich protein 1, an ER coactivator. Conclusions These data highlight CXCR7 as a potential therapeutic target warranting clinical investigation in endocrine-resistant BC

    Single-shot compressed ultrafast photography at one hundred billion frames per second

    Get PDF
    The capture of transient scenes at high imaging speed has been long sought by photographers, with early examples being the well known recording in 1878 of a horse in motion and the 1887 photograph of a supersonic bullet. However, not until the late twentieth century were breakthroughs achieved in demonstrating ultrahigh-speed imaging (more than 10^5 frames per second). In particular, the introduction of electronic imaging sensors based on the charge-coupled device (CCD) or complementary metal–oxide–semiconductor (CMOS) technology revolutionized high-speed photography, enabling acquisition rates of up to 10^7 frames per second. Despite these sensors’ widespread impact, further increasing frame rates using CCD or CMOS technology is fundamentally limited by their on-chip storage and electronic readout speed. Here we demonstrate a two-dimensional dynamic imaging technique, compressed ultrafast photography (CUP), which can capture non-repetitive time-evolving events at up to 10^(11) frames per second. Compared with existing ultrafast imaging techniques, CUP has the prominent advantage of measuring an x–y–t (x, y, spatial coordinates; t, time) scene with a single camera snapshot, thereby allowing observation of transient events with temporal resolution as tens of picoseconds. Furthermore, akin to traditional photography, CUP is receive-only, and so does not need the specialized active illumination required by other single-shot ultrafast imagers. As a result, CUP can image a variety of luminescent—such as fluorescent or bioluminescent—objects. Using CUP, we visualize four fundamental physical phenomena with single laser shots only: laser pulse reflection and refraction, photon racing in two media, and faster-than-light propagation of non-information (that is, motion that appears faster than the speed of light but cannot convey information). Given CUP’s capability, we expect it to find widespread applications in both fundamental and applied sciences, including biomedical research
    • …
    corecore